|
These are but a sample of the
hundreds of unique battery and
charger models that are in iTECH production
today.
Single-station
Chargers
 
Li-ion 1&2-cell,
Dallas EPROM Comms;
Multi-station Battery Chargers
-
Li-ion 1&2 cells; Dallas EPROM Comms;
Li-ion 3 cells; ; BQ2050 fuel
gauge with discharge circuit for calibration. This
is the only known charger that monitors the BQ2050 for
corruption and rewrites the damaged registers!
Li-ion 2 cells; Dallas EPROM
Comms; Charges Battery and/or Radio;
Li-ion 2 cells; Charger with
Comm to BQ2060 SMBus with MUX; Intelligent Discharge for
Fuel Gauge Calibration; 250Watt internal supply.
Low cost one and four station, three-cell NiCd
charger with elective battery conditioning.
Medical product
power source and battery charger. 4"x 2.5"x1.5".
 
Li-ion 2 cells; Desktop Cradle Charger with
Comm to BQ2060 SMBus with MUX; Intelligent Discharge for
Fuel Gauge Calibration; 100Watt internal supply. Lower
model with USB/100BaseT option docking system. Note the
scanner cable relief on the top older model.
Vehicle Cradle with Port Replicator. Cradle powers
host on 12/24VDC. Shown with customer-supplied pedestal
mount. One button, one hand release/lock mechanism. Port
Replicator connects serial peripherals and USB host to
the Cradle.
Quad Docking Systems. Powers Host,
including power for battery charging. USB to 100BaseT
bidirectional Comms.
One of many NiMH and NiCD batteries in iTECH production
today.
 
Lithium ion
battery - the first with a BQ20z80 fuel gauge. battery
SLA, charger PCA and battery PCA with fuel gauge.
BQ20z80 remains accurate without calibration and related
costly discharge circuitry.
 
A sample of
lithium ion battery packs that are in production at
iTECH today. Another unique iTECH
advantage is at work here. We design and build iTECH
safety circuits. The cell manufacturers review and
approve. Then we produce them with our internal SMT
line. This translates in tighter quality control and
less cost to the OEM.
|
